Analysis of 20 kV Underground Cable Network Implementation on SM3 Feeder, Tomohon Main Substation
Downloads
The continuous growth of electricity demand requires a reliable and efficient distribution system. The SM3 Feeder at the Tomohon Main Substation (GI Tomohon), managed by PT PLN (Persero) UP3 Manado, is a critical medium-voltage distribution network serving the Tomohon city centre area. The feeder currently employs overhead aerial conductors that are vulnerable to environmental disturbances such as extreme weather, strong winds, lightning, and vegetation contact, which leads to frequent outages and reduced supply quality. This study investigates the implementation of a 20 kV underground cable network on the SM3 Feeder as a strategy to improve system reliability. The methodology encompasses field surveys, technical data collection, and comparative performance analysis of the distribution system before and after underground cable implementation. Quantitative analysis was applied to evaluate technical parameters including fault frequency, and the reliability indices SAIDI and SAIFI, while qualitative analysis is used to assess the practical advantages and constraints observed during field implementation. Results demonstrate that underground cable implementation significantly reduces environmentally induced faults, providing improvements in safety, system reliability, and urban aesthetics. Although capital investment and installation costs are considerably higher than those of overhead networks, the long-term operational benefits including substantial reduction in fault frequency, improved supply continuity, and longer service life justify the investment. Underground cable networks are thus confirmed as an effective solution for enhancing power distribution quality and reliability, particularly in urban areas with high fault incidence.
Adesina, L. M., Ogunbiyi, O., & Jimada-Ojuolape, B. (2024). Comparative analysis of the reliability assessment of commercial and residential feeders in the power distribution utility of Nigeria. E-Prime-Advances in Electrical Engineering, Electronics and Energy, 9, 100651.
Afzali, P., Keynia, F., & Rashidinejad, M. (2019). A new model for reliability-centered maintenance prioritisation of distribution feeders. Energy, 171, 701–709.
Agustan, S. T., Putra, I. A. A., La Welendo, I., & Azikin, I. H. M. T. (2025). Urban & Regional Transportation Engineering The Conceptual Approach of Engineering Management. Uwais Inspirasi Indonesia.
Akbar, S., Singh, S. K., & Kanga, S. (2024). Disaster Management: Preparedness and Mitigation. John Wiley & Sons.
Bawono, A. A. (2020). The Functional Performance of Engineered Cementitious Composites Material for Electrified Roadway Application in Singapore: Skid resistance, surface water drainage, noise, and self-cleaning. Technische Universität München.
Bindi, M., Piccirilli, M. C., Luchetta, A., & Grasso, F. (2023). A comprehensive review of fault diagnosis and prognosis techniques in high voltage and medium voltage electrical power lines. Energies, 16(21), 7317.
Buhari, M. (2016). Reliability assessment of ageing distribution Cable for replacement in smart distribution systems. The University of Manchester (United Kingdom).
Dadzie, J., Runeson, G., Ding, G., & Bondinuba, F. K. (2018). Barriers to adoption of sustainable technologies for energy-efficient building upgrade—Semi-structured interviews. Buildings, 8(4), 57.
Dube, K., & Letsatsi, N. (n.d.). Mapping Lightning Incidents and Their Impacts in South Africa; a Climate Perspective. Available at SSRN 5388144.
Ghodeswar, A., Bhandari, M., & Hedman, B. (2025). Quantifying the economic costs of power outages owing to extreme events: A systematic review. Renewable and Sustainable Energy Reviews, 207, 114984.
Guillén-López, D., Serrano-Guerrero, X., Barragán-Escandón, A., & Clairand, J.-M. (2024). Transient and steady-state evaluation of distributed generation in medium-voltage distribution networks. Energies, 17(22), 5783.
Ilango, V. (2025). Role of Advance Techniques in Urban Disaster Management Caused by Climate Variations. Climate Resilience: Impact of Quantum Computing and Artificial Intelligence on Urban Planning, 275–292.
Ismail, N. (2017). Issues and Challenges Toward a Sustainable Dam Management System in Selangor, Malaysia. University of Malaya (Malaysia).
Maruvanchery, V., Zhe, S., & Robert, T. L. K. (2020). Early construction cost and time risk assessment and evaluation of large-scale underground cavern construction projects in Singapore. Underground Space, 5(1), 53–70.
Moradi-Sarvestani, S., Dehbozorgi, M. R., & Rastegar, M. (2024). A three-stage reliability-centered framework for critical feeder identification, failure modes prioritization, and optimal maintenance strategy assignment in power distribution system. Electric Power Systems Research, 230, 110215.
Osunde, A. O. (2022). Medium and low voltage distribution grid network composition analysis and review for the North American and European networks. Technische Hochschule Ingolstadt.
Panteli, M., & Mancarella, P. (2015). Influence of extreme weather and climate change on the resilience of power systems: Impacts and possible mitigation strategies. Electric Power Systems Research, 127, 259–270.
Sadeghi, M., Mahmoudi, A., & Deng, X. (2022). Adopting distributed ledger technology for the sustainable construction industry: evaluating the barriers using Ordinal Priority Approach. Environmental Science and Pollution Research, 29(7), 10495–10520.
Salanga, S. A., Karugaba, S., & Kiiza, R. (2025). Development of Maintenance Management System to Improve Reliability of Power Supply in Medium Voltage Distribution Network: A Case of TANESCO, Kinondoni North Region.
Sanstad, A. H., Zhu, Q., Leibowicz, B., Larsen, P. H., & Eto, J. H. (2020). Case studies of the economic impacts of power interruptions and damage to electricity system infrastructure from extreme events.
Copyright (c) 2026 Yehezkiel Eliezer Tangkawarouw, Sandro Welly Lendeng, Arnold Robert Rondonuwu, Nathaniel Lumalan Bijang, Donald Bastian Noya
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
