Implementasi Cost of Quality Pekerjaan Bekisting Konvensional dan Semi Sistem Studi Kasus Proyek Embung KIPP Lanjutan dan DAS Pemaluan
Downloads
Indonesia's construction industry faces challenges in maintaining quality while optimizing costs, especially in the selection of formwork methods that greatly affect the quality of concrete structures and overall project efficiency. This study aims to analyze the implementation of Cost of Quality (COQ) in conventional and semi-system formwork for the KIPP Continuation Dam and DAS Pemaluan project. The research method uses a comparative quantitative approach with COQ analysis covering prevention, appraisal, internal failure, and external failure costs. Results show that conventional formwork COQ is 87.14%, dominated by internal failures (43.54%) due to vulnerability to installation errors and material damage. Meanwhile, semi-system formwork COQ is 21.77% with a more balanced distribution between prevention costs (44.04%) and internal failures (15.62%). Technical planning shows conventional formwork requires support spacing of 170mm, horizontal supports 810mm, and braces 690mm, while semi-system requires 250mm, 900mm, and 1065mm respectively. Although conventional formwork material costs are 63% cheaper than semi-system, the high total quality costs make semi-system more efficient overall with more consistent performance and minimal rework risks.
Adyatmaka, A., & Efendi, M. (2022). Perbandingan antara pekerjaan bekisting knock down dengan bekisting climbing system pada pembangunan proyek pintu air di wilayah Demangan, Kota Surakarta. Jurnal Konstruksi, 3(4), 1–15.
American Concrete Institute. (2014). Guide to formwork for concrete (ACI 347R-14). ACI.
Arumsari, P., & Xavier, C. (2020). Cost and time analysis on the selection of formwork installation method. IOP Conference Series: Earth and Environmental Science, 426(1), 1–8.
Crosby, P. B. (1979). Quality is free: The art of making quality certain. McGraw-Hill.
Feigenbaum, A. V. (2004). Total quality control (4th ed.). McGraw-Hill.
Gaddam, M. S., & Achuthan, A. (2020). A comparative study on newly emerging type of formwork systems with conventional type of form work systems. Materials Today: Proceedings, 33, 736–740.
Girsang, H. (2023). Analisis penggunaan bekisting konvensional, baja dan sistim peri dari segi biaya pada struktur pier konstruksi ramp on/off jalan tol. Jurnal Teknik Sipil, 12, 1–20.
Greco, S., Foti, D., & Russo, S. (2023). Innovative formwork solutions for critical hydraulic infrastructures: Stiffness optimization and casting accuracy. Journal of Hydraulic Engineering, 149(1), 04022068. https://doi.org/10.1061/(ASCE)HY.1943-7900.0002057
Juran, J. M., & Godfrey, A. B. (1999). Juran's quality handbook (5th ed.). McGraw-Hill.
Kim, S., & Park, C. (2020). Deflection behavior of formwork under concrete pressure and its influence on surface tolerances. Engineering Structures, 223, 111227. https://doi.org/10.1016/j.engstruct.2020.111227
Liu, X., Chen, Y., Wang, J., & Zhao, L. (2019). Monitoring system for detecting formwork displacement in real time during concrete casting. Automation in Construction, 107, 102931. https://doi.org/10.1016/j.autcon.2019.102931
Masgode, M. B., Hidayat, A., Laksmi, I. A. C. V., Triatmika, I. N. A., Puspayana, I. P. A. I., Iskandar, A. A., Syarif, M., Rachman, R. M., Herlambang, A. R., & Dirgantara, A. (2024). Dinamika Industri Konstruksi di Indonesia. Tohar Media.
Maulana, B. F., Ratnasari, S. A., & Setiawan, A. (2024). Analisa perbandingan bekisting semi sistem (knockdown) dengan bekisting konvensional berdasarkan RAB. Jurnal Konstruksi Teknik Sipil, 5(2), 45–58.
Patel, M., Shah, K., & Mehta, S. (2021). Comparative analysis of formwork systems for high-deformation resistance and surface quality in RCC structures. Journal of Performance of Constructed Facilities, 35(5), 04021123. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001669
Peurifoy, R. L., & Oberlender, G. D. (2002). Formwork for concrete structures (4th ed.). McGraw-Hill.
Santoso, S. (2021). Hubungan antara tingkat risiko kecelakaan konstruksi dengan tinggi lantai pembangunan gedung pada pengangkatan, pemasangan dan pembongkaran bekisting aluminium. Jurnal Keselamatan Konstruksi, 8(3), 112–125.
Sirait, E. G., Wardani, P. C., & Taufik, Y. A. (2023). Perbandingan penggunaan sistem bekisting konvensional dan aluminium pada proyek pembangunan Mall X. Jurnal Manajemen Konstruksi, 15(2), 78–92.
Wiguna, A. D., & Sujana, C. M. (2023). Comparisonal analysis of formwork costs conventional, semi-system and aluminium on shear wall work. E3S Web of Conferences, 426, 1–12.
Zhang, H., Li, J., & Sun, Y. (2022). Effects of formwork deflection on concrete surface quality in hydraulic structure casting. Construction and Building Materials, 315, 125593. https://doi.org/10.1016/j.conbuildmat.2021.125593
Copyright (c) 2025 Mukhamad Subkhi, Ervina Ahyudanari
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
